Metallic infrared sensors with temperature output 4-20mA

The optical level switch has been designed for use in level monitoring applications for the control of the liquid presence/absence and can be suitable for a lot of applications due to the wide chemical compatibility assured by the technology of the fused glass dome with the stainless steel body. The switch has no moving parts, thus it is particularly suited for monitoring critical media where high reliability is needed.
For minimum / maximum level detection the switch must be mounted at the desired height and gives an alarm when low (or high) liquid level is detected.
This series of switches incorporates the 4-20mA temperature output in order to be implemented in all the environments in which the temperature must be monitored continuously.

operation mode: detect liquid presence with contact
body materials: Stainless Steel with Glass sensible dome

K06 4-20 mA Level Switch
MAX. TEMPERATURE RANGE: from -40°C up to +125°C (depending on terminations)
STORAGE TEMPERATURE: from -40°C up to +125°C (depending on terminations)
MAX PRESSURE: up to 40 bar
Click here to read the detailed K06 4-20 mA level switch technical sheet
K25 Level Switch
The optical level switch has been designed for use in level monitoring applications for the control of oil or liquid CO2 for transcritical or subcritical application. The sensor provides two outputs: digital and analogical
MAX. TEMPERATURE RANGE: from -40°C up to +125°C
STORAGE TEMPERATURE: from -40°C up to +125°C
MAX PRESSURE: up to 150 bar
Click here to read the detailed K25 level switch technical sheet
 
Copyright 2008-2009 - Teklab S.r.l. - Via Emilia Ovest, 1179 - 41123 Modena - Italy - P.IVA 01976750362 - Company Register of Modena n. 01976750362 - Paid-in Capital Euro 10.000 i.v.