K04 Level Switch

k04-plastic-level-switch

DESCRIPTION

The K04 family of level switches have bodies as well as sensor dome made of Polysulphone reinforced with fibre glass. They are economical, dependable, and compact in size with overall dimensions of 47 x 22 mm and have no moving parts. They are ideal for a variety of point level sensing applications where reliability and low cost are desired.These level switches use infrared technology for their operation. They consist of an infrared emitter and an optical receiver. They have an operating temperature range of -40 to 85 deg C. There is a programmable timer inside these K04 level switches that allows a delay time to be set for delaying the output switching. The output mode is normally closed or open in air and the output current (DC or AC) is up to 100mA depending on modelThe K04 level switches must not be installed close to any infra red sources. The dome must be at least 50mm away from any reflective surface. These level switches have electronic protection against transient over voltage, reverse polarity for DC models and output short circuit. The K04 family of level switches have a detection accuracy of +/- 2 mm. They can withstand maximum pressure of 40 bars.



TECHNICAL DATA:
Operation mode:
Detect liquid presence with contact
Repeatability:
± 2 mm
Sensible dome:
Polysulphone (PSU) charged with glass
Electronic protections:
Transient over voltage, reverse polarity (for DC models), output short-circuit
Max. Temperature range:
From –40ºC up to +85ºC
Storage Temperature:
From –40ºC up to +85ºC
Supply voltage:
10 – 28 VDC or 24 VAC ± 10% 50 or 60 Hz
Output type:
AC output or NPN, NPN open collector, PNP for DC model
AC / DC Output current:
up to 100 mA Max (depending on temperature range)
Output mode:
Output Normally Open or Closed in the air
Delay times:
Customizables depending on application needings
MECHANICAL DIMENSIONS:
ELECTRICAL CONNECTION: