K11 Level Switch

k11-level-switch-ir-sensor

DESCRIPTION

The K11 family of level switches are suitable for high pressure applications like pressurized vessels, HVAC and refrigeration, motors etc. They have bodies made of stainless steel and sensor dome made of glass. They are economicaldependable, and compact in size with overall dimensions of 59 x 27 mm and have no moving parts.These level switches use infrared technology for their operation. They have an operating temperature range of -40 to 125 deg C. There is a programmable timer inside these K11 level switches that allows a delay time to be set for delaying the output switching. The output modes are closed in presence of liquids and open in air or vice versa. The AC / DC output current is up to 100mA depending on model.The K11 level switches must not be installed close to any infrared sources. The dome must be at least 50mm away from any reflective surface (for lower distances please directly contact us). These level switches have electronic protection against transient over voltage, and reverse polarity (for DC models). The K11 family of level switches have a detection accuracy of +/- 2 mm. They can withstand maximum pressure of 60 bars.



TECHNICAL DATA:
Operation mode:
Detect liquid presence with contact
Repeatability:
± 2 mm
Body materials:
Stainless Steel
Sensible dome:
Glass
Electronic protections:
Transient over voltage, reverse polarity (for DC models)
Media Temperature:
From –40ºC up to +125ºC
Storage Temperature:
From –40ºC up to +125ºC
Supply voltage:
10 – 28 VDC or 24 VAC ± 10% 50 or 60 Hz
Output type:
AC output or NPN, NPN open collector, PNP for DC model
AC / DC Output current:
up to 100 mA Max (depending on temperature range)
Output mode:
Output Normally Open or Closed in the air
Delay times:
Customizables depending on application needings
Max pressure:
up to 60 bar (burst 120 bar)
Torque tighten:
15 Ntm
MECHANICAL DIMENSIONS:
ELECTRICAL CONNECTION: