LC-PH Level Switch up to 120bar

FOTO LC-PH OK

DESCRIPTION

The optical level switch LC-PH has been designed for use in level monitoring applications for the control of low viscosity liquids. It comprises an optical sensor and an output switch. It is realized in two parts to let it possible to replace the electronics without the needing of emptying or depressurizing the plant. The sensor is suitable as minimum or maximum alarm. Delays can be introduced in order to satisfy particular needing or avoid false alarms. Typical customizable functions: Activation Delay, Deactivation delay, others, ..





TECHNICAL DATA:
Supply voltage:
230VAC@50Hz / 115VAC@60Hz / 24 VAC@50/60Hz / 24VDC depending on selected model
Electronic protections:
Transient over voltage protection
Electrical connection:
3 wires cable, 1m length
Output mode:
Solid state output Normally Open or Normally Closed in air
Supply current:
20mA max. during normal operation
Max. output current:
Up to 100 mA
Housing materials:
Nickel plated steel / PA glass fibre reinforced
Protection class:
IP 65
Max. Temperature range at liquid detecting point:
-40°C÷ +125°C
Max pressure:
120 bar (for higher pressures, please contact the supplier)
Torque tighten:
50 Nm for adapter installation on the system. Hand Screw with strength the sensor to the adapter